现浇防撞墙模具尺寸规格齐全 生产技术** 支持定制

防撞墙模具介绍的主要内容是模具大小以及使用原理，混凝土防撞墙模具属于中型钢模具之一，而单套防撞墙模板使用的年限可以达到5年左右，这就需要制作的模板结实耐用程度高了。
The main contents of the mould for the anti-collision wall are the size of the mould and the principle of its use. The mould for the concrete anti-collision wall is one of the medium-sized steel moulds, while the service life of the single set of the mould for the anti-collision Wall can reach about 5 years, this requires the template to be strong and durable.

混凝土防撞墙模具简介是根据现有生产技术、设备，在较高的钢模具生产技术平台之上，进行二次创新，以获得新的模具生产技术，从而推动企业发展。我厂不断完善服务，这样我们才能走的更远，发展的更好，同时也为消费者提供优质的井体，保定建信用心服务每一位合作客户。所以混凝土防撞墙的生产就非常方便了。
The introduction of concrete anti-collision Wall Mould is based on the existing production technology and equipment, on the higher steel mould production technology platform, to carry on the second innovation, in order to obtain the new mould production technology, thus to promote the development of enterprises. I plant constantly improve service, so that we can go further, the development of better, but also to provide consumers with high-quality wells, Baoding Yuda service every customer. So the production of concrete anti-collision wall is very convenient.
防撞墙模具是根据目前公路使用的各类防撞护栏模板而言，因为生产技术参差不齐，导致很多施工单位遇到的模板都是采用薄、小或者焊接技术不达标的出现。

Anti-collision Wall Mould is based on the various types of anti-collision guardrail formwork used in the current highway, because of the uneven production technology, resulting in many construction units encountered templates are using thin, small or welding technology is not up to standard.


在防撞护栏模具的制作上，讲究的是根据施工条件定制不同长度的模板，比如有机械辅助的话，可以每米设置2米以上，这样在连接的时候就减少了时间，而人工搬运的话，需要将模板长度定制在1.5米以下，这样工人搬运才会方便。防撞护栏模板根据长度大小，上下的固定方式都相同，但是固定的拉杆数量不同，1米的防撞护栏钢模具上下各一个拉杆，左右开螺丝孔，这样每套之间可以对接，而长度超过2米的需要上下设置4个，这样固定才会更加结实。In the manufacture of the mould for the anti-collision Guardrail, the emphasis is on customizing the templates of different lengths according to the construction conditions. For example, if there is mechanical assistance, it can be set at least 2 meters per meter, thus reducing the time when connecting, while manual handling, it is necessary to customize the length of the formwork below 1.5 meters so that the workers can carry it easily. The anti-collision Guardrail formwork is fixed in the same way up and down according to its length, but the number of fixed pull rods is different. The steel mould for the anti-collision Guardrail has one pull rod up and down, and the screw holes are left and right, so that each set can be butted, the length of more than 2 meters need to set up four, so that the fixed will be more solid.